Anti Microbials
Which products help to create our healthy environments?
The products we use have been sourced from world-leading suppliers , based here in Australia.
They are truly at the forefront of the drive to create healthier environments and hold tremendous advantages over conventional cleaning agents.
Designed to form a multifocal approach to health and safety, the products detailed below work in unison as part of a complete system.
This system takes into consideration not only surface hygiene but the air that we breathe and the people we interact with.
Because health is not only about clean surfaces but relies on creating safe and non-toxic environments wherever we go.
Bio Protect Disinfectant For Surfaces - Hospital Grade
28 Day
Residual Activity
for Bacteria
BioProtect® Surface Spray Disinfectant -Hospital Grade and Commercial Grade are unique film forming disinfectants that kills on contact, and creates an antimicrobial barrier that has persistent activity to help prevent the transmission of germs in environments such as Schools, kindergartens, shopping centres, office buildings, cruise ships, public transport and any other environments where people are in close proximity to each other for extended periods.
How does it Work ?
Bonds to surfaces for lasting protection
BioProtect™ Surface Spray Disinfectant - Hospital Grade offers a rapid, broad spectrum kill and persistence far longer than most disinfectants. It does this by bonding to the surface, creating safe and long lasting transparent shield over surfaces enabling it to continue fighting harmful germs long after you spray.
BioProtect™ Surface Spray Disinfectant - Hospital Grade is ideal for use on all surfaces including bench tops, stainless steel, PVC plastics, Aluminium, Wood, Linoleum, carpet, curtains and fabrics, polished concrete, stone and more.
BIOPROTECT™ is registered by the TGA as effective against SARS-CoV-2 (the coronavirus that causes COVID-19) and to provide 28 Day Residual Activity for Bacteria
Mode of Action
Once applied, BioProtect™ Surface Spray Disinfectant – Hospital Grade forms a strong bond with the surface, ensuring the active ingredients remain in place, ready to work over and over again. This persistent activity can help prevent the transmission of germs making it suitable for use in environments such as hospitals, clinics, nursing homes, cruise ships, public transport and other environments where people are in close proximity to each other for extended periods.
Bleach and chlorine free
BioProtect™ Surface Spray Disinfectant - Hospital Grade is free of the harsh chemicals found in most disinfectants, such as bleach, ammonia, and chlorine. It is also phosphate free so will not contribute to phosphate pollution of soil and waterways. The powerful antimicrobial formula is readily biodegradable
Australian Register of Therapeutic Goods No. 343410
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
Bio Protect Touch Point Sanitiser – cleans, protects and sanitises
BioProtect® Touch Point Sanitiser is a unique and powerful multi-application cleaner, sanitiser and antimicrobial protectant. The revolutionary formula of multiple active ingredients make it perfectly suited for use in areas that are frequently touched, such as door handles, handrails, trolley, counter tops, and any other surface that multiple people touch on a regular basis, containing 75% isopropyl alcoholand other active ingredients it is versatile enough to be use as a long lasting hand or surface sanitiser. After application it produces a durable bonded coating with long lasting antimicrobial properties.
How does it Work ?
UNIQUE FAST ACTING FORMULATION // BioProtect®Touch Point Sanitiser is a unique combination of isopropyl alcohol, surfactants and quaternary ammonium compounds. Isopropyl alcohol provides a rapid kill of germs while the surfactants clean surfaces. Once dried,the quaternary ammonium compounds create a clearlong-lasting protective coating on the surface to offer superior protection to the user, reducing the transmission of germs. BioProtect® Touch Point Sanitiser is designed to dry quickly, clean and sanitise all in one application.
BLEACH & CHLORINE FREE // BioProtect® Touch PointSanitiser is free of the harsh chemicals found in most disinfectants, such as bleach, ammonia, and chlorine. The powerful antimicrobial formula is non leaching once it has dried and PRODUCT tethered to a surface.
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
LONG Lasting Protective Coating for Screens & Devices
BioProtect® Touch Screen Sanitiser is a unique and powerful multi-application cleaner, sanitiser and antimicrobial protectant. The revolutionary formula and active ingredients make it perfectly suited for use on touch screens, phones and computers, protecting the screens from harsh chemicals but at the sametime gentle and powerful enough to be used as a long-lasting hand sanitiser. After application it produces a durable bonded coating with long lasting antimicrobial properties.
CLEANS // This superior formulation effectively cleans away dirt, oils, fats, grease, germs and bacteria from screens, leaving them clean andsmudge free.
SANITISES // Kills 99.99% of bacteria and germs and is one of the safest and widest ranging bacteria inhibiting sanitisers available.
PROTECTS // Provides superior long-lasting protection from germs for both screens and hands to reduce contact transmission of pathogens.
How does it Work ?
BLEACH & CHLORINE FREE // BioProtect® Touch Screen Sanitiser is free of the harsh chemicals found in most disinfectants, such as bleach, ammonia, andchlorine. The powerful antimicrobial formula is non leaching once it has dried and tethered to a surface.
BONDS TO SURFACES // Once dried, a clear longlastingprotective coating is formed on the screen to offer superior protection to the user, reducing the transmission of germs from user to users. BioProtect® Touch Screen Sanitiser is designed to dry quickly without smudging or fogging up the screen. The unique formulation has been designed in line with manufacturers recommendations and wont impact the integrity of screens or touchpads .
BLEACH & CHLORINE FREE // BioProtect® Touch Screen Sanitiser is free of the harsh chemicals found in most disinfectants, such as bleach, ammonia, andchlorine. The powerful antimicrobial formula is non leaching once it has dried and tethered to a surface .
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
Bioprotect Hand Sanitiser
An important part of a healthy environment is good sanitary measures from the people in it.
Our Healthy Environment protocols incorporate BioProtect Hand Sanitiser in many types of environments, from healthcare facilities and food manufacturers (where frequent glove use occurs) to public transport and the tourism industry.
A single application of BioProtect® Hand Sanitiser on the skin not only eliminates and inactivates bacteria, but also prevents reinfection by maintaining a long-lasting protective barrier. Other hand sanitisers on the market today are primarily ethyl or isopropyl alcohol formulations, which are largely antibacterial in nature and only provide protection for a few minutes.
BioProtect® Hand Sanitiser uses unique antimicrobial technology that not only kills on contact, but also has persistent activity that helps prevent infections. The persistence of BioProtect® Hand Sanitiser has been shown to remain effective for more than 12 hours.
Skin Friendly- Alcohol Free Formula
Most hand sanitisers contain high percentages of alcohol to poison germs, generally over 62%. This creates a highly flammable, poisonous mix that carries with it opportunity for being ingested, amongst other factors. Constant use of alcohol based hand sanitisers has the effect of drying out your skin, leading to irritation and cracking. BioProtect® Hand Sanitiser is water based and contains no alcohol. It’s non-flammable, and non-poisonous, making it safer for the whole family.
BioProtect® Hand Sanitiser is water-based with added aloe vera to leave your hands feeling fresh and soft. It's been designed to be non-irritating ,leaving a fresh citronella fragrance once applied.
How does it Work ?
BioProtect® Hand Sanitiser eliminates 99.99% of the germs it comes in contact with by disrupting the outer cell membranes resulting in a physical kill. This physical kill ensures microorganisms don’t adapt or become resistant over time.
BioProtect® Hand Sanitiser uses unique antimicrobial technology that not only kills on contact, but also has persistent activity that helps prevent infections. The persistence of BioProtect® Hand Sanitiser has been shown to remain effective for more than 12 hours.
Mode of Action
BioProtect® Anti-Microbialproducts are based on Silyl-Quat nanoparticle technology that through third party laboratory testinghas shown exceptional efficacy and longevity far beyond anything else available in the market today.
These products are a unique blend of polyquats (amixture of quaternary ammonium chloride compounds) consisting of a sophisticated polymer backbone formula employing multifaceted modes of activity. This 3-component system works synergistically to build a safe but powerful anti-microbial punch that not only kills microorganisms on contact, but also has persistent activity. This persistent activity can help prevent the transmission of germs making it suitable for use in environments such as hospitals, clinics, nursing homes, cruise ships, public transport and other environments where people are in close proximity to each other for extended periods of time .
Coverage Rate
The normal volume of alcohol hand sanitizer used when in gel form is around 2 ml per application. Bio Protect hand sanitiser uses a foam application of 0.2ml per application so effectively you get 10 times the applications with the Bio Protect product.
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
Sanders Air Filters
Sanders air filters (also called containment filters) are designed to protect your environment from airborne pathogens.
Airborne transmission of disease is one of the great hidden threats in our environments. However, this is poorly understood.
Sub-micron airborne clouds of particles can spread over very long distances as aerosols.
A 2013 study by the University of Maryland concluded that there are nine times more culturable virus in the humidity exhaled from the lungs of a person infected with the flu than in a cough or sneeze.
Many organisations therefore fail to take adequate steps to maintain a healthy quality of air.
With the use of Sanders filter, particles the size of known pathogens are captured and prevented from entering your air supply, enhancing the ability to contain the spread of respiratory viruses.
Sanders containment filters are:
- New, synthetic filters developed with efficiencies higher than HEPA, 99.99980% @ 0.1 micron
- Soft, flexible pads with a very low static pressure, .17 W.C. @ 125 cfm/sq. ft.
- Independently tested on virus VFE
- Able to provide HEPA (High Efficiency Particulate Air) or near-HEPA filtration of the return air duct directly, in any room.
- Able to filter air quality without any reconstruction costs of transforming HVAC units.
The filters can be cut to fit any HVAC system, from transportation to buildings and indoor stadiums.
How do they work?
By attaching Sanders containments filters pads over every return vent or at the main unit, you will capture most particles the size of known pathogens, as it is about to enter the HVAC system.
Initially this technology can be instituted by attaching small “pads” of material onto the sides of commercial floor driers/air movers that are rated to ½ HP and 700-1200 cfm (suction of the device holds the material in place).
This provides substantial air filtration in specific locations. Alternatively, since they are corded devices, a number of driers could be placed within a facility during off hours, left overnight and removed at the start of business to provide a measure of starting indoor air each day beyond HEPA quality.
The filters are available in roll form and can be cut in the field, which is both user-friendly and cost-effective.
product video
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
GERM SOLUTIONS (long-term mould removal and protection)
Germ Solutions is a mould remediation and prevention solution that works on most surfaces and provides ongoing protection against most microorganisms (bacterial and fungal) even when surfaces are wiped down.
Designed for antimicrobial protection, proper application on indoor surfaces can eliminate existing microbial growth and greatly inhibit future growth.
Because microorganisms cannot develop immunity to this solution, as the kill method is mechanical rather than by poisoning, it does not encourage the development of superbugs like MRSA (a particular fear when using some antimicrobial products).
Germ Solutions is:
- A durable, broad-spectrum antimicrobial
- EPA-Registered
- Approved for use under the provisions US FIFRA (Federal Insecticide, Fungicide and Rodenticide Act)
- Suitable for use on all porous and non-porous interior non-food contact surfaces
- Odourless, colourless and will not stain fabrics or other surfaces
- Non-leaching, with no off-gassing
- Free of heavy metals, phenols, and other toxins
- A “bound” solution that permanently bonds to surfaces it is applied to
How does it work?
Germ Solutions forms durable ionic and covalent bonds with the surface it is applied to, creating a co-polymer in the process.
The nitrogen molecules in the polymer have a positive charge which physically disrupts the cell membrane of microbes.
This disruption kills the microbe and the polymer remains active and ready to kill the next microbe which comes along. It is a mechanical “kill process” rather than using poisons.
BODY TEMPERATURE MEASUREMENT & CROWD CONTROL (for infection prevention)
In high-traffic environments, body temperature monitoring is the most effective way to prevent infectious diseases from being introduced from outside.
This is because fever is the leading indicator of infection and the best predictor of contagiousness.
Being able to prevent entry of potentially contagious people can help reduce transmission of infections in shopping malls, sports stadia, and other crowded public spaces.
How does it work?
We use a combination of devices and strategies to make this happen.
- Thermal cameras mounted at each entry point, detecting body temperature (in excess of 38 degrees indicates sickness)
- Hand-held temperature scanners to individually check people with raised temperature readings
- Thermal body temperature monitoring solutions with facial recognition technology – especially useful for staff entrances
Additionally, smart 3D cameras can be used to automatically count and display the number of people entering an area.
This helps crowded public spaces limit the number of individuals entering, if necessary.
As well as crowded retail environments, this technology may be used in public transport, airports manufacturing businesses, aged care facilities, hospitals, schools, hotels, pubs, sports venues, or anywhere where large numbers of people need to be measured across multiple entrances.
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
MICROFIBRE WORLD CLOTHS (more effective removal of bacteria)
The use of microfibre has had a huge impact on commercial cleaning.
In combination with the right cleaning products, microfibre is effective at:
- Cleaning on a microscopic scale
- Attracting dust due to its electrostatic properties
- Absorbing fat and grease
Microfibre materials can reduce the number of bacteria on surfaces by 99%. A conventional cleaning material is only a third as effective.
Our Microfibre World cloths are 80 percent polyester and 20 percent polyamide.
They are also super absorbent (can hold up to seven times their weight in water) and leave no lint or streaking when cleaning.
The weight of our knitted microfibre cloths is 330 GSM while our woven cloths are 350 GSM.
This is important as lightweight cloths soon disintegrate. Ours last the distance so that they can be used again and again with peak performance every time.
How does it work?
Microfibre cloth is made from synthetic fibres about 1/100th the diameter of human hair.
Our cloths are made from polyester and polyamide. These fibres and their unique properties provide microfibre with its characteristic softness, high absorption, electrodynamics and filtering capabilities.
Bioprotect Hand Sanitiser
An important part of a healthy environment is good sanitary measures from the people in it.
Our Healthy Environment protocols incorporate BioProtect Hand Sanitiser in many types of environments, from healthcare facilities and food manufacturers (where frequent glove use occurs) to public transport and the tourism industry.
A single application of BioProtect® Hand Sanitiser on the skin not only eliminates and inactivates bacteria, but also prevents reinfection by maintaining a long-lasting protective barrier. Other hand sanitisers on the market today are primarily ethyl or isopropyl alcohol formulations, which are largely antibacterial in nature and only provide protection for a few minutes.
BioProtect® Hand Sanitiser uses unique antimicrobial technology that not only kills on contact, but also has persistent activity that helps prevent infections. The persistence of BioProtect® Hand Sanitiser has been shown to remain effective for more than 12 hours.
Skin Friendly- Alcohol Free Formula
Most hand sanitisers contain high percentages of alcohol to poison germs, generally over 62%. This creates a highly flammable, poisonous mix that carries with it opportunity for being ingested, amongst other factors. Constant use of alcohol based hand sanitisers has the effect of drying out your skin, leading to irritation and cracking. BioProtect® Hand Sanitiser is water based and contains no alcohol. It’s non-flammable, and non-poisonous, making it safer for the whole family.
BioProtect® Hand Sanitiser is water-based with added aloe vera to leave your hands feeling fresh and soft. It's been designed to be non-irritating ,leaving a fresh citronella fragrance once applied.
How does it Work ?
BioProtect® Hand Sanitiser eliminates 99.99% of the germs it comes in contact with by disrupting the outer cell membranes resulting in a physical kill. This physical kill ensures microorganisms don’t adapt or become resistant over time.
BioProtect® Hand Sanitiser uses unique antimicrobial technology that not only kills on contact, but also has persistent activity that helps prevent infections. The persistence of BioProtect® Hand Sanitiser has been shown to remain effective for more than 12 hours.
Mode of Action
BioProtect® Anti-Microbialproducts are based on Silyl-Quat nanoparticle technology that through third party laboratory testinghas shown exceptional efficacy and longevity far beyond anything else available in the market today.
These products are a unique blend of polyquats (amixture of quaternary ammonium chloride compounds) consisting of a sophisticated polymer backbone formula employing multifaceted modes of activity. This 3-component system works synergistically to build a safe but powerful anti-microbial punch that not only kills microorganisms on contact, but also has persistent activity. This persistent activity can help prevent the transmission of germs making it suitable for use in environments such as hospitals, clinics, nursing homes, cruise ships, public transport and other environments where people are in close proximity to each other for extended periods of time .
Coverage Rate
The normal volume of alcohol hand sanitizer used when in gel form is around 2 ml per application. Bio Protect hand sanitiser uses a foam application of 0.2ml per application so effectively you get 10 times the applications with the Bio Protect product.
Click here for Brochure,
Test results and Safety Data Sheets
View Brochure
Mould defence
Mould is a natural part of our environment, necessary in breaking down dead organic matter such as wood and leaves. However, when found indoors it is regarded as harmful to buildings, animals and humans. Moulds are simple, microscopic organisms that exist unseen virtually everywhere. When moisture and nutrients become abundant, single mould cells will settle on a surface and begin to form colonies. Once started, a colony will grow quickly spreading across walls, furniture and fabrics. Aside from the damage caused to the surfaces, mould to has been touted by health experts as “the next asbestos” proclaiming it as a world-wide health risk.
To kill the mould use BioProtect™ Industrial Treatment
BioProtect™ Industrial Treatment is an environmentally safe and user friendly biological treatment for the control of odour, rapid biodegradation of organic material and control of mould.
To prevent mould regrowth use BioProtect™ Sanitiser & Surface Protection
BioProtect™ Sanitiser & Surface Protection is a unique film forming sanitiser that kills on contact and creates an antimicrobial barrier that has persistent activity to help prevent the growth of mould
For a Wide Range of Surfaces
Designed to be easily applied by spraying, wiping or fogging. Free of the harsh chemicals found in most mould treatments such as bleach and chlorine. Both products are non-corrosive and non-staining making it suitable for a wide range of surfaces, including: fabrics, carpets, walls, concrete, brickwork, footpaths and driveways, roofs, tiles, tents, tarps or any other surface that is susceptible to mould growth.